Copying Mixed Size Originals on Your Xerox Multifunction Device

Have you ever needed to make a copy of letter size and legal size documents?  Well it can be difficult to do on some machines.  But not on your Xerox multifunction device (MFD).  You can easily copy mixed size originals by using the mixed size option on the copy layout tab.  Of course the paper sizes must be loaded in the machine.

To copy with mixed size originals select the Copy option and then select Layout Adjustment and then select Original Size.  In Original Size you will select the Mixed Sized Original setting.  These instructions may vary depending on the model of the machine you are using.  As always please consult the support page for your machine for instruction or for the user manual which will also have the instructions.  Not all machines have the mixed size original capabilities but many do.  So check it out for your machine either in the User Manual or at support.

I have included this little video about how to copy mixed size originals.  This video is based on a WorkCentre 7525/7530/7535/7545/7556  so your screens and instructions may be different.  But the video will give you a good idea of what the feature can do and how easy it is to use.

Remember a video may be available for your machine.  You can look to see if there are videos for your machine by going to the support page for your machine and looking for the video tab.  If the video tab is there check for a video on Mixed Size Originals.

Related Posts

Receive Updates


  1. Judy Sullivan June 21, 2013 - Reply

    where is the video? “I have included this little video about how to copy mixed size originals.”

    • Cheryl Otstott June 21, 2013 - Reply

      Hi Judy,
      Opps!! Thank you for the heads up. The video should be visible now.

  2. Debbie December 8, 2017 - Reply

    If your originals are legal sized and 1/2 page legal sized but you want them printed on only letter sized, how do you print these?

    • Cheryl Otstott December 14, 2017 - Reply

      Hi Debbie,
      Thank you for reading the At Your Service blog. You do not mention which machine you are using and whether this is a copy job or print. If it is print the page size needs to be changed in the program the document was created in and also set to the same paper size in the driver.
      If the problem continues please consider contacting your local support centre

Post A Comment

Your email address will not be published. Required fields are marked *

To see how we protect your personal data, view our Privacy Policy.